3 Configure LonWorks points using the LonWorks Integration Tool
LonWorks Integration Guide
CARRIER CORPORATION ©2018
i-Vu® Link and Open Link
All rights reserved
8
9
Click the disk-in-folder icon
to save a .erl file with your microblock addresses.
10
Return to the i-Vu® or Field Assistant interface.
11
Double-click the third party controller in the navigation tree. A dialog window appears.
12
Navigate to
Integration Points
at the bottom of the screen and click
Import
.
13
Browse to the .erl file that you saved from the LonWorks Integration Tool.
14
Click
Open
and then
Continue
to upload the file.
15
Click
Close
. The LonWorks addresses are now set
NOTE
The LonWorks Integration Tool creates microblock addresses in the following format:
lonworks://domain index/subnet/node/NV number/SNVT index/element/NV parameter/group
EXAMPLE
lonworks://0/1/2/3ff5/108/0/0/0
To edit an integration point address
You can edit an integration point address in the following places:
•
In Snap
•
In the i-Vu® or Field Assistant interface on the
Properties
page >
Control Program
tab
•
In the i-Vu® or Field Assistant interface on the
Properties
page >
Network Points
tab
•
In the LonWorks Integration Tool
