5
SAM SETUP 1
AUX:
AUX SENSOR
IP TYPE:
DHCP
IP:
192.168.100.0
MAC ADDR:
00:01:02:03:04:05
SUBNET MASK:
255.255.255.000
SERVER
STATUS:
CONNECTED
< BACK
NEXT >
SAM SETUP 2
DEFAULT GATEWAY:
192.168.001.001
DNS SERVER:
061.010.231.015
PORT:
49152
SERVER
STATUS:
CONNECTED
< BACK
NEXT >
AUX:
With previous generation UID/UIZ systems,
the auxiliary sensor can be renamed to something meaningful, such as WATER or
GENERATOR. Use the Temp +/-- buttons to move between letters, and the Time +/-- button to choose letters.
For newer generation Infinity
Touch systems
, this input is always labeled “SAM AUX SENSOR ALERT”.
The following items are for use with the previous generation UID/UIZ systems, only:
IP TYPE:
Choose DHCP (default) or STATIC for the Internet addressing type.
IP:
Shows the current IP address of the CAT--5 B--SAM. If IP TYPE is STATIC then this item can be changed. Use the Temp +/-- buttons to
move between numbers, and the Time +/-- button to choose numbers. If IP TYPE is DHCP, the IP address cannot change.
MAC ADDR:
Shows the MAC Address of the CAT--5 B--SAM’s network module.
SUBNET MASK:
If the IP TYPE is STATIC, this can be changed to a different subnet number. Use the Temp +/-- buttons to move between
numbers, and the Time +/-- button to choose numbers. If IP TYPE is DHCP, the SUBNET MASK cannot be changed.
DEFAULT GATEWAY:
If the IP TYPE is STATIC, this can be changed to point to a different gateway. Use the Temp +/-- buttons to move
between numbers, and the Time +/-- button to choose numbers. If IP TYPE is DHCP, the DEFAULT GATEWAY cannot be changed.
DNS SERVER:
If the IP TYPE is STATIC, this can be changed to point to a different DNS server. Use the Temp +/-- buttons to move
between numbers, and the Time +/-- button to choose numbers. If IP TYPE is DHCP, the DNS SERVER cannot be changed.
PORT:
This can be changed to use a different port through the homeowner’s network. The default is port 49152.
SERVER STATUS:
Shows status of the CAT--5 B--SAM connection to Carrier’s servers. If the screen shows NON CONNECTED, please
check network settings or network cable.
Home
Automation
Connection
(RS- 232)
STATUS
COMM1
COMM2
WLSC
WLS
A1
B1
C1
A2
B2
C2
SERIAL NUMBER
TEST
AUXILIARY
SENSOR
ABC TO
SYSTEM 1
ABC TO
SYSTEM 2
24VAC
Ethernet
Module
A06512
Fig. 1 -- CAT--5 Module Control Board
