POSITION
Place the freezer horizontally on a firm surface, resting on all
four wheels.
The room should be dry and adequately ventilated.
Temperatures of the external environment have an
impact on the energy consumption of the device.
Therefore:
-
do not put the device to a place exposed to sunshine ore
besides a radiator or oven,
-
put it to a place where the temperature of the
environment corresponds to the climatic classification for
which the device was designed.
Climatic classification Ambient temperature limits
SN
from +10 to +32°C
N
from +16 to +32°C
ST
from +18 to +38°C
T
from +18 to +43°C
Do not place the freezer close to sources of heat, radiators,
chimneys, etc., and do not place the freezer in direct
sunlight.
If the freezer has been handled standing on end it should be
allowed to stand in normal position for about 12 hours before
switching it on
Please ensure that when the appliance is installed it is easily
accessible for the engineer in the event of a breakdown.
SSW
WIITTC
CH
HIIN
NG
G O
ON
N
Before switching on, the freezer should be cleaned inside.
See under Maintenance.
Allow the freezer to run for several hours before placing
food inside.
4
INSTALLATION
EELLEEC
CTTR
RIIC
CA
ALL R
REEQ
QU
UIIR
REEM
MEEN
NTTSS
Before switching on, make sure that the voltage of your
electricity supply is the same as that indicated on the rating
plate, located on the backside of the appliance.
WARNING:
This appliance must be earthed.
WARNING:
The enclosed wheels must be fitted before
switching on the freezer.Do not use the appliance
without the wheels because it may result
malfunction.
GB
