![background image](http://html.mh-extra.com/html/carrier/crystal-plus-53khft-12/crystal-plus-53khft-12_a6716511df758830bc5510c21c0aa9de_2561237024.webp)
( )
19
USE OF REMOTE CONTROL (Cont.)
TIMER OFF Function
If you want to stop automatically the air conditioner at the desired
time ( between 0 ~ 24 hrs ), use TIMER OFF function
TIMER OFF function is useful when you go to sleep.
TO SET TIMER OFF TIME
1.
Press the Timer button
. The remote control shows TIMER OFF, the
last Auto-off setting time and the signal
" TIMER OFF "
will be shown
on the LCD display area. Now it is ready to reset the Auto-off time.
2.
Press the Timer button
again to set desired Auto-off time. Each time
you press the button, the time increases by half an hour between 0 and
10 hours and by one hour between 10 and 24 hours.
3.
After setting the TIMER OFF, there will be a one half second delay before
the remote control transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal
" TIMER OFF "
will
disappear and the set temperature will re-appear on
the LCD display of
the remote control.
TIMER
light of appears on the display panel of the indoor unit.
TO CANCEL TIMER OFF FUNCTION
Press Timer button
until the time setting is 0.0
EXAMPLE OF TIMER OFF SETTING
To stop automatically the air conditioner in 10 hours.
1.
Press the Timer button
, the last setting of stopping
operation time and the signal
" TIMER OFF "
will show
on the display of the remote control.
2.
Press the Timer button
to display "23" on the
TIMER OFF display of the remote controller.
3.
Wait for 0.5 second and the TIMER OFF stops flashing and
this function is activated. The display of the remote
control will show the set temperature again.
CAUTION
When you select the timer operation, the remote control automatically transmits the TIMER OFF signal to the
indoor unit for the specified time.
Therefore, keep the remote control in a location where it can transmit the signal where it can transmit the
signal to the indoor unit properly.
The effective operation time set by the remote control for the TIMER OFF function is limited to the following
settings: 0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20, 21, 22, 23, and 24.
10 hours later
Stop
On
Set