Using the menu for advanced features
Carrier Connect™ Wi
-Fi Thermostat 33CONNECTSTAT43FX
CARRIER CORPORATION ©2021
Installation Guide
All rights reserved
26
Setting
Default/Range
SCREEN TIMEOUT
—
Set the number of seconds you want the home screen to stay active
without any user interactions before transitioning to the dormant screen.
Banner displays
SCREEN TIMEOUT
.
D:
R:
15 seconds
5 to 30 seconds
(5 second increments)
WI-FI ENABLE
—
Enable (yes) or disable (no) the Wi-Fi functionality for the thermostat. If
disabled, the Wi-Fi radio in this product is turned off and Wi-Fi functionality is
unavailable, including
SYNC TIME TO SERVER
,
OUTDOOR TEMPERATURE
via Wi-Fi
geolocation,
SERVER & WI-FI ERRORS
and
REMOTE ACCESS SERVICES
via APP or WEB.
D:
R:
YES
YES
NO
FLTR HRS LEFT xxxx
—
The number of hours left before the filter reminder displays
RESET FILTER
—
Reset the filter hours to the installer-specified number if the filter is
changed prior to the timer counting down to zero. Press
SELECT
, use up and down
arrows to display
YES
, and press
SAVE
.
NOTE
Decrements to the timer happen each hour of total equipment runtime. The
accumulated run time hours are stored to non-volatile memory, but the minutes are not,
so a power cycle does not retain partial hour runtime.
FILTER REMINDER
displays on the home screen and dormant screen banners when the
filter timer counts down to zero.
If you touch the home screen banner when the
FILTER REMINDER
message displays, the
thermostat transitions directly to
FLT HRS LEFT
screen. The banner message button is a
shortcut to the
FLT HRS LEFT
screen when the filter timer has expired. You can access
the
FLT HRS LEFT
screen at any time through the menu.
D:
R:
NO
YES
NO
To adjust the banner text
These settings allow you to customize the information shown on the top banners of the home and dormant
screens.
The
FAN STATUS
,
HEAT SETPOINT
, and
COOL SETPOINT
selections only apply to the dormant screen banner
because this information is already displayed in other areas of the home screen.
Setting
Default/Range
DATE AND TIME
•
When the date and time setting is
NO
, the date and time information are not
displayed on the home or dormant screen banners.
•
When the date and time setting is
YES
, the date, in month/day/year format, and the
time, in 12 hour AM/PM format, display in both the home and dormant screen
banners.
R:
YES
NO
FAN STATUS
•
When set to
NO
, the state of the fan output (the G relay) is not displayed on the
dormant screen banner.
•
When set to
YES
, the dormant screen banner displays either
FAN OFF
or
FAN ON
,
based on the state of the fan output.
R:
YES
NO
Summary of Contents for Connect 33CONNECTSTAT43FX
Page 4: ......
Page 68: ......
Page 69: ......
Page 70: ...Carrier 2021 Catalog No 11 808 872 01 12 3 2021 ...