5
Installation
•
Roll the unit to the place where it will be installed. If the floor is not flat and level,
the unit may tip from side to side. If it does tip, take the time to level the unit.
• Choose a place that is near a grounded electrical outlet.
• For the most efficient operation, the freezer should be located where surrounding
temperatures will not exceed 110°F (43°C). Temperatures of 32°F (0°C) and below
will NOT affect freezer operation. Additional compressor heaters are not recommended.
•
Locate the freezer out of direct sunlight.
•
Allow space around the unit for good air circulation.
Leave a 3 inch (75 mm) space
on all sides of the freezer for adequate circulation.
Cleaning
• Wash any removable parts, the freezer interior, and exterior with mild detergent
and warm water. Wipe dry.
DO NOT USE HARSH CLEANERS ON THESE
SURFACES. DO NOT WASH REMOVABLE PARTS IN A DISHWASHER.
•
Do not use razor blades or other sharp instruments, which can scratch the appliance
surface when removing adhesive labels. Any glue left from the tape can be
removed with a mixture of warm water and mild detergent, or touch the residue
with the sticky side of tape already removed.
DO NOT REMOVE THE SERIAL
PLATE.
Cool Down Period
Once the appliance has been located in its permanent location, check to be certain
the proper power and grounding have been provided. For safe storage, allow 4 hours
for freezer to cool down completely. The freezer will run continuously for the first
several hours.
Temperature Control
The temperature control is located inside the freezer on upright models, and on
the left outside wall on chest models. The temperature is factory preset to provide
satisfactory food storage temperatures. However, the temperature control is
adjustable to provide a range of temperatures for your personal satisfaction. If a
colder temperature is desired, turn the temperature control knob toward COLDEST
and allow several hours for temperatures to stabilize between adjustments.
Setting the
Temperature Control
Set-Up
Instructions
(continued)
Summary of Contents for B13
Page 9: ......
