manualshive.com logo in svg

Carrier AquaForce 61XWHZE, Control Manual

Share
Download
Carrier AquaForce 61XWHZE Control Manual Download Page 41

41

6 - STANDARD CONTROL OPERATIONS AND OPTIONS

6.17 - Trending

This function enables to visualise the operations of the unit and 

monitor a set of selected parameters.

To display trends

1.  Go to the Main menu.
2.   Select 

Trendings

 (TRENDING).

3.  Select parameters to be displayed and press the 

Save

 button 

in the lower-left part of the screen.

4.  Press the 

Trending

 button 

 to display the graph showing 

trends for the set of selected parameters.

 

■

Press 

 

 to navigate across the timeline or press 

 

 

to go to the beginning or the end of the selected period.  

 

■

Press the 

Zoom in

 button 

 to magnify the view or 

the 

Zoom out

 button 

 to expand the viewed area.

 

■

Press the 

Refresh

 button 

 to reload data.

NOTE: The 7" touch screen can display 10 points instead of 

4 on the graph.

For web interface only:

 

 

■

Set the time range (start/end dates and time) at the bottom of 

the Trendings Plot screen and press the 

Arrow

 button 

 on 

the right side to display the graph showing the performance of 

the unit within a selected period of time.

6.18 - User quick test

The Quick Test functionality allows users to test and verify if certain 

components of the unit behave correctly (only logged-in users can 

activate the Quick Test). 

To enable Quick Test

1.  Navigate to the Main menu.
2. Select 

Quick Test 1

 (QCK_TST1). The menu can be accessed 

when logged in at user access level.

3. Set 

Quick test Enable

 [QCK_TEST] to “on”.

Quick test Enable [QCK_TEST]

Off/On

On

IMPORTANT: To enable the Quick Test functionality, the unit 

must be stopped (Local off mode).

Once the Quick Test functionality is enabled, it is possible to test 

parameters  such  as  valves,  pumps’  commands,  etc.  For  more 

details, please see the Quick Test 1 table description (QCK_TST1 

– Quick Test 1) in section 

5.1.

6.19 - BACnet (option 149)

The BACnet/IP communication protocol is used by the building 

management system or the programmable controllers to 

communicate with the SmartVu

TM

 control.

NOTE: This option requires the Software Activation Key 

(see section 6.21).

6.20 - Modbus (option 149B)

The Modbus communication protocol is used by the building 

management system or the programmable controllers to 

communicate with the SmartVu

TM

 control. 

NOTE: This option requires the Software Activation Key 

(see section 6.21).

Summary of Contents for AquaForce 61XWHZE





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands