background image

 

11 

62-61974-01 

 

4.5

 

Charging and supplying the Refrigeration unit 

 

During daily operation, whenever the user has the opportunity to charge 
the  system  and  supply  the  Refrigeration  unit  from  the  power  grid 
simultaneously, please proceed as described below:  

1.

 

Press the green button (OFF light in white);

 

2.

 

Connect the vehicle to the power grid; 

 

3.

 

Check that     is lit in white; 

 

4.

 

Turn ON the Refrigeration unit;

 

5.

 

The Refrigeration unit will start automatically;

 

6.

 

The display will activate the electric motor indicator, meaning 
that the Refrigeration unit is operating in electric mode;

 

7.

 

Wait 30 seconds, the system will start charging automatically 
and the ON light will be either blinking or lit in white; 

 

8.

 

The autonomy indicators will blink during charge representing the battery level.  

 

Keeping the system ON, it will automatically manage the power. 

Notes: 

(1) Before disconnecting the power grid cable, do the following:

  

 

1.

 

Stop the Refrigeration unit; 

2.

 

Press the green button until OFF is lit; 

3.

 

Disconnect the power grid cable. 

 

 

Summary of Contents for AddVolt



















Reviews: