5-1
SECTION 5
SCHEMATICS
5.1 INTRODUCTION
This section contains Electrical Wiring Schematics and Diagrams covering the Model listed in Table 1-1. The
following general safety notices supplement the specific warnings and cautions appearing elsewhere in this manual. They
are recommended precautions that must be understood and applied during operation and maintenance of the
equipment covered herein.
WARNING
Electrical power is generated by a Lima 15 KW, A-C generator.The generator provides a constant 460 or 230 vac,
3 phase, 60 hertz electrical supply.
WARNING
Beware of moving V-belts and belt driven components.
WARNING
Before servicing unit, make sure the unit circuit breaker (CB-1 or CB-4) and the start-stop switch are in the
OFF position. Also disconnect power plug and cable.
Make sure the power plug(s) are clean and dry before connecting to any power receptacle.
WARNING
High voltage (dielectric) testing must not be performed to the machine without first observing NEMA rules. The
insulation of this generator winding may be safely checked by using a megger. A high megger reading indicates
low insulation leakage.
CAUTION
The generator set circuit breaker must be in the ON position in order to supply power to the refrigeration unit.
