Installation instructions
Step 3. Installation
1. For <12000Btu/h models, first remove two
screws on the chassis fixing brackets, then
remove the chassis fixing brackets(Fig.4) ;
For >12000Btu/h models, remove the four
screws located on both sides and the back
of the cabinet, then remove the chassis
fixing bracket as shown in Fig.4.
2. Grasp the handle on the chassis and carefu-
lly slide the air conditioner out of the cabinet
(See Fig.5).
3. If you hope the condensed water be drained
outside, install the drain tray at the bottom of
the cabinet(See Fig.6).
4. Push the unit chassis into the cabinet (See
Fig.7).
5. Install the chassis and cabinet, ensure the
chassis fixing brackets and screws are
securely installed to prevent the air conditioner
from sliding out of the cabinet (See Fig.4).
Step 4. Install the frame.
1. Install the frame and connect the coupler
plugs, making sure not to interfere with the
temperature sensor cable (See Fig.8).
2. Fix the screws on the frame (See Fig.2).
Step 5. Install the air filter and front panel.
1. Make sure the air filter is properly installed
on the back of the front panel before reinstall
the front panel.
2. Hang the front panel on the frame's buckle,
then press the front panel into the frame's
slot until you hear a click (See Fig.9).
Fig.5
Fig.7
Fig.8
Fig.9
Fig.4
Screws
Drain tray
Supporter
Cabinet
Wall
Fig.6
2 Fixing brackets
(<12000Btu/h model)
One fixing bracket
(>12000Btu/h model )
14
