GB - 10
T I M E R
F A
N
ON
AUTO
OFF
M O D E
3
2
1
6
7
10
11
12
16
13
Timer programming
Night operation
(cooling only with dehumidification)
CONTROL
PANEL
CONTROL
PANEL
desired temperature which will appear on display
7
.
• Using the fan speed selector, button
3
, select the fan speed
which may be low, high or automatic. If you select the Auto
mode, the air conditioner automatically selects the most
suitable speed to adjust the room temperature. LED
10, 11
or
12
of the fan speed selected illuminates on the control panel.
• Press the ON button
1
.
• Press the function selector, button
2,
and select night
operation. The night operation LED
16
and the cooling
LED
13
illuminate on the panel. The luminosity of the LEDS
on the control panel is attenuated.
• By pressing the temperature selector, button
6
, select the
With the
4
button the air conditioner can be programmed
to switch on automatically at the preset time.
• Each time the button is pressed the switch-on time is
changed as follows: 0.5 - 1 - 1.5 - 2 - 3 - 4 - 5 .....- 23 -
24 hours after the present time.
• The preselected time will be displayed for five
seconds on the display instead of the temperature.
• When the timer is programmed, switching on LED
8
is on.
• The air conditioner does not need to be switched on
to program the timer.
Example: The present time is 09.00 a.m. and you want
the air conditioner to switch on after 1-1/2 hours.
• Press the
4
button until the figure 1.5 appears on
the display.
• The air conditioner has now been programmed to
switch on at 10.30 a.m.
• LED
8
, the LEDS of the selected function mode and
the display remain on.
• If the air conditioner is running when the timer is
programmed, the unit will automatically switch off,
and switch on again at the programmed switch-on
time.
• At any time you can check the time remaining before
the air conditioner switches on, by pressing the
4
button once.
• The timer program can be changed at any time.
• To deactivate the timer hold button
4
down for at
least five seconds.
Timer programming
when switching on
With the
5
button the air conditioner can be programmed
to switch off automatically at the preset time.
• Each time the button is pressed the switch-off time is
changed as follows: 0.5 - 1 - 1.5 - 2 - 3 - 4 - 5 … - 23
- 24 hours after the present time.
• The preselected time will be displayed for five
seconds on the display instead of the temperature.
• when the timer is programmed, switching off LED
9
is on.
Example: The present time is 09.00 a.m. and you want
the air conditioner to switch off after 1-1/2 hours.
• Press the
5
button until the figure 1.5 appears on the
display.
• The air conditioner has now been programmed to
switch off at 10.30 a.m.
•
LED
9
, the LEDS of the selected function mode and
the display remain on.
• If the air conditioner is not running when the timer is
programmed, the unit will automatically switch on,
and switch off again at the programmed switch-off
time.
• At any time you can check the time remaining before
the air conditioner switches off, by pressing the
5
button once.
• The timer program can be changed at any time.
• To deactivate the timer hold button
5
down for at
least five seconds.
Timer programming
when switching off
Combined timer
programming:
switching on/
switching off
(or vice versa)
• It is possible to program both functions.
• The air conditioner will automatically switch on after
the time set with the
4
button, and switch off after
the time set with the
5
button.
• To program the switch-on and switch-off time (or
vice versa) follow the steps described above for the
two individual operations.
• The TIMER-ON and TIMER-OFF LEDs light up in
sequence when each function is performed.
Example: The present time is 09.00 a.m. and you want
the air conditioner to switch off after 1-1/2 hours and
switch on again after 3 hours.
• Press the
5
button until the figure 1.5 appears on
the display.
• Press the
4
button until the figure 3.0 appears on
the display.
• The air conditioner has now been programmed to
switch off at 10.30 a.m. and switch on again at
12.00.
•
The LEDS for programmed switching off
9
,
programmed switching on
8
, selected function
mode and the display will remain on.