GB - 4
Cooling with dehumidification
1
2
6
7
8
Plug the unit in.
Open the air flow direction guide vane.
Hold the hose end in position with the
fastening strap and suction cup.
Make sure the flexible hose is not kinked
or curved too tightly and that it is placed
on a supporting surface (windowsill,
floor...).
Turn the mode selector to TURBO cooling
or to SILENT cooling.
The unit is now ready for cooling.
Ensure that the warm air discharged from
the end of the hose is not obstructed.
4
5
3
TURBO
SILENT
Air flow
Air flow
Install the flexible hose onto the air conditioner. To improve the air
conditioner performance make sure that:
- the internal tips of the flexible hose are turned as shown in the
picture;
- the hose is stretched as little as possible;
- the hose is not bent, folded or throttled.
If required, the air conditioner can be
installed through a porthole in the window
or through a hole in the wall follow the
instructions in the manual relating to this
component.
Move the air conditioner close to
the window, stretching the hose
as little as possible (max.
extension 1100 mm).
To open the
window as little as
possible, place the
air outlet vent onto
the flexible hose
and place them
outside the
window.
