![background image](http://html1.mh-extra.com/html/carrier/438mg-series/438mg-series_installation-instructions-manual_2560919027.webp)
pipe is long. A prop stand must be
installed
signal wiring to avoid cross-disturbance.
The installation bearer of the sensing
device rotates to the another side, and
thenremoves the cover of the electrical
box. (Takeoff the electrical box if the
capacity is18000btu/h or when using
network function.) (Refer to Fig.50-10)
New house es should have this test
All the pictures in this manual are for
illustration purposes only. They may
differ slightly from the air conditioner
you purchased(depending on model).
regulations.
The air conditioner shou ld use a separate power
of above 10mA shall be used in the fixed
4.9ft~6.6ft/1.5m~2m
65.6ft/20m
(about 3.9in/10cm)
0.12in/3mm
27
Summary of Contents for 438MG series
