4
5
"
!
1
2
7
8
#
3
9
6
1
Press
: Move the louver in
the desired vertical direction.
2
Press
: Swing the air
automatically and press again to
stop.
3
For horizontal direction, adjust
manually.
Note:
●
Do not move the louver manually by others.
●
The louver may automation positioning by some operation mode.
●
Display brightness can be adjusted, follow procedure on
"
.
AUTOMATIC OPERATION
5
To automatically select cooling or fan only operation
1. Press
: Select A.
2. Press
: Set the desired temperature.
3. Press
: Select AUTO, LOW , LOW+
, MED
,
MED+
, or HIGH
.
1. Press
: Select Cool
or Fan only
.
2. Press
: Set the desired temperature.
Cooling: Min. 17°C, Fan Only: No temperature indication
3. Press
: Select AUTO, LOW , LOW+
, MED
,
MED+
, or HIGH
.
DRY OPERATION
COOLING / FAN ONLY OPERATION
7
6
For dehumidi
fi
cation, a moderate cooling performance is controlled
automatically.
1. Press
: Select Dry .
2. Press
: Set the desired temperature.
Hi-POWER OPERATION
8
To automatically control room temperature and air
fl
ow for faster cooling
(except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
1
TIMER (White)
2
OPERATION (White)
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button (
)
4
Temperature button (
)
5
Fan speed button (
)
6
Swing louver button (
)
7
Set louver button (
)
8
Off timer button (
)
9
High power button (
)
!
Economy button (
)
"
Clear button (CLEAR)
#
Check button (CHECK)
PRECAUTIONS FOR SAFETY
REMOTE CONTROL
4
INDOOR UNIT DISPLAY
1
PREPARATION BEFORE USE
2
AIRFLOW DIRECTION
3
Preparing Filters
1. Open the air inlet grille and remove the air
fi
lters.
2. Attach the
fi
lters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type) following the (+)
and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
DANGER
●
Do not install, repair, open or remove the cover. It may
expose you to dangerous voltages. Ask the dealer or the
specialist to do this.
●
Turning off the power supply will not prevent potential electric
shock.
●
The appliance shall be installed in accordance with national
wiring regulation.
●
Means for disconnection from the supply having a contact
separation of at least 3 mm in all poles must be incorporated
in the
fi
xed wiring.
WARNING
●
Do not expose your body directly to cool air for a long time.
●
Do not insert your
fi
nger or any article into the air inlet/outlet.
●
When an abnormality (burning smell, etc.) occurs, stop the
air conditioner and disconnect the power supply or turn off
the breaker.
●
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
●
Children should be supervised to ensure that they do not play
with the appliance.
●
Do not use any refrigerant different from the one speci
fi
ed
(R410A) for complement or replacement. Otherwise,
abnormally high pressure may be generated in the
refrigeration cycle, which may result in a failure or explosion
of the product or an injury to your body.
CAUTION
●
Do not wash the unit with water. It may cause an electric
shock.
●
Do not use this air conditioner for other purposes such as
preserving food, breeding animal, etc.
●
Do not step or put anything on the indoor/outdoor unit. It may
cause an injury or damage the unit.
●
Do not touch aluminium
fi
n because it may cause an injury.
●
Before cleaning the unit, turn off the main switch or the circuit
breaker.
●
When the unit won’t be used for a long time, turn off the main
switch or the circuit breaker.
●
It is recommended that maintenance be performed by a
specialist when the unit has been operated for a long time.
●
The manufacturer shall not assume any liability for the
damage caused by not observing the description of this
manual.
01_1118350207_EN.indd 2
01_1118350207_EN.indd 2
2/3/2559 BE 15:05
2/3/2559 BE 15:05
