7
Indoor unit
Check transmitting and receiving
Turn on the main power supply
Point the remote control at the remote control receiving module on the indoor unit.
●
A waiting period of 3 minutes is required after the power is turned on. During this period, the operation lamp will illuminate. However, the compressor will not
start.
●
The correct signal is confirmed by the receiving tone and the operation lamp will illuminate.
●
When
button is pressed, the receiving tone will sound and the operation will stop.
●
Check that the signal is transmitted and received at the installed position if the remote control is fixed to the remote control holder.
The receiving and
transmitting distance.
Approx. 7m from straight
in front of the indoor unit.
●
Use the remote control where the indoor unit can receive the signal. It does not work if the signal is obstructed by curtains or sliding doors.
●
The distance for transmitting and receiving is shorter if a bright light, such as sunlight, affects of the main unit.
●
The distance for transmission and receiving is shorter if the remote control is operated at an oblique angle to the main unit.
Notes
1120650258-1_S03-182x257_68p_S_p70_190223.indd 7
23/2/2562 11:07:52
Summary of Contents for 42TVAA018
Page 65: ...1120650258 1_S03 182x257_68p_S_p70_190223 indd 33 23 2 2562 11 09 45 ...
Page 66: ...1120650258 1_S03 182x257_68p_S_p70_190223 indd 34 23 2 2562 11 09 45 ...
Page 67: ...1120650258 1_S03 182x257_68p_S_p70_190223 indd 35 23 2 2562 11 09 45 ...
Page 68: ...1120650258 1 1120650258 1_S03 182x257_68p_S_p70_190223 indd 36 23 2 2562 11 09 45 ...