)
EN
Carrier 1110650142 (EN)
1
Infrared signal emitter
2
Start/Stop button (
)
3
Mode select button (
)
4
Temperature button (
)
5
Fan speed button (
)
6
Swing louver button (
)
7
Set louver button (
)
8
On timer button (
ON
)
9
Off timer button (
OFF
)
!
Sleep timer button (
)
"
Setup button (
)
#
Clear button (
)
$
Memory and Preset button (
)
%
High power button (
)
&
Economy button (
)
(
Filter reset button (
)
)
Clock Reset button (
)
~
Check button (
)
Note:
Some models, remote will have text above
the buttons.
ON
OFF
1
Press
: Move the louver in the
desired vertical direction.
2
Press
: Swing the air
automatically and press again to stop.
3
For horizontal direction, adjust
manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
To automatically select cooling or fan only operation
1. Press
: Select A.
2. Press
: Set the desired temperature.
1. Press
: Select Cool
or Fan only
.
2. Press
: Set the desired temperature.
Cooling: Min. 17
o
C, Fan Only: No temperature indication
3. Press
: Select AUTO, LOW , LOW+
, MED
, MED+
,
or HIGH
.
For dehumidifi cation, a moderate cooling performance is controlled
automatically.
1.
Press
: Select Dry
.
2.
Press
: Set the desired temperature.
To automatically control room temperature and airfl ow for faster cooling operation
(except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
To automatically control room to save energy (except in DRY and FAN ONLY
mode)
Press
: Start and stop the operation.
Note:
Cooling operation; the set temperature will increase automatically 1 degree/
hour for 2 hours (maximum 2 degrees increase).
In case of the misplaced or discharged remote control
• Pressing the RESET button, the unit can start or
stop without using the remote control.
• Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.
Set the timer when the air conditioner is operating.
Setting ON Timer
Setting OFF Timer
1
Press
ON
: Set the desired ON
timer.
Press
OFF
: Set the desired OFF
timer.
2
Press
: Set the timer.
Press
: Set the timer.
3
Press
: Cancel the timer.
Press
: Cancel the timer.
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Setting Everyday Timer
1
Press
ON
: Set the ON timer.
3
Press
.
2
Press
OFF
: Set the OFF
timer.
4
Press
button during the
( or ) mark fl ashing.
• During the every day timer is activating, both arrows ( , ) are indicated.
Note:
• Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
• The setting will be saved for the next same operation.
5
4
3
&
%
9
)
"
#
$
(
8
7
6
1
2
!
~
A
C
L
Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the accessory sheet).
Loading Batteries
1. Remove the battery cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1. Push CLOCK
•
by tip of the pencil.
If timer indication is fl ashing, go to the next step 2.
2. Press
ON
or
OFF
: adjust the time.
3. Press
: Set the time.
Remote Control Reset
1. Remove the battery.
2. Press
.
3. Insert the battery.
PREPARATION BEFORE USE
2
AIRFLOW DIRECTION
3
REMOTE CONTROL
4
AUTOMATIC OPERATION
5
COOLING / FAN ONLY OPERATION
6
DRY OPERATION
7
Hi-POWER OPERATION
8
ECO OPERATION
9
TEMPORARY OPERATION
10
TIMER OPERATION
11
