5
6
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Special function
CLEAN AIR function(on some models)
Follow Me function(on some modles)
To activate the Follow Me feature, point the remote control towards the unit and press the
Follow Me button. The remote display is actual temperature at its location. The remote
control will send this signal to the air conditioner every 3 minutes interval until press the
Follow Me button again.
If the unit does not receive the Follow Me signal during any 7 minute interval,the Follow Me
mode will be cancelled automatically.
The remote control serves as a remote thermostat allowing for the precise
temperature control at its location.
Improving the quality of indoor air is one of the mission of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector (Depending on specific
configuration of the model).
With the anions generated by Ionizer, the air circulation of the air conditioner fills the room
with refreshing, natural and healthy air. The Plasma Dust Collector generates an high voltage
ionization zone, through which the air is converted to plasma. Inside the air most of the dust,
smoke, and pollen particles are captured by the electrostatic filter.
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will
continue operating for about 7-10 minutes (depending on models) at LOW fan speed.
This will help to dry up the condensed water inside the evaporator, and prevent the
breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is completely
off.
Anti-mildew function(on some models)
Parts names
Outdoor unit
Indoor unit
NOTE:
All the pictures in this manual are for
explanation purpose only. Your air
conditioner may be slightly different.
The actual shape shall prevail.
4
3
5
2
6
1
8
10
11
9
7
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5. Horizontal air flow grille
6. Vertical air flow louver
7. Display panel
8. Remote controller
9. Connecting pipe, drain hose
10. Air inlet (side and rear)
11. Air outlet
Indoor unit
Outdoor unit
Indicator Lights on Display panel
AUTO indicator:
This indicator illuminates when the air
conditioner is in AUTO operation.
DEFROST
Indicator
(For cooling& heating model only):
This indicator illuminates when the air
conditioner starts defrosting automatically
or when the warm air control feature is
activated in heating operation.
DIGITAL DISPLAY:
Displays the current setting temperature
when the air conditioner is in operation.
OPERATION indicator:
The indicator flashes once every second
after power is on and illuminates when the
air conditioner is in operation.
TIMER indicator:
The indicator illuminates when TIMER is
set ON/OFF.
1
2
3
4
5
11
Signal
receptor
(
。
C)
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
SLEEP
ON/OFF
TIMER OFF
AIR
DIRECTION
RESET LOCK
SET TEMPERATURE
SWING
LED
DISPLAY
TURBO
auto
2
3
4
5
