42HQE009 / 012 / 018 / 022
GB - 4
Operating temperature
CAUTION:
1. If air conditioner is used outside of the above conditions, certain safety protection features may come into operation and cause the unit to function
abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this figure, the surface of the air conditioner may attract condensation.
Please sets the vertical air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.
Temperature / Mode
Cooling operation
Heating operation
Drying operation
Room temperature
17
°
C ~ 32
°
C
0
°
C ~ 27
°
C
17
°
C ~ 32
°
C
Outdoor temperature
18
°
C ~ 43
°
C
-7
°
C ~ 24
°
C
11
°
C ~ 43
°
C
Manual operation can be used temporarily in case you can not find
the remote controller or its batteries are exhausted.
For 42HQE009 / 012 / 022
Open and lift the front panel up to an angle until it remains fixed
with a clicking sound.
Push the switch until the AUTO indicator is lit, the unit will work
in forced AUTO mode.
Close the panel firmly to its original position.
CAUTION:
• Once you push the manual switch, the operation mode is
shifted: AUTO, COOL, OFF.
• Push the manual switch until the OPERATION lamp flashes
rapidly (five times per second), the unit now is operating in forced
COOL mode.
This is used for testing purposes only.
On forced COOL mode, the remote operation function is
unavailable.
• When the OPERATION lamp goes off, the air conditioner is
OFF.
• To restore the remote controller operation, use the remote
controller directly.
For 42HQE018
Open and lift the front panel up to an angle until it remains fixed
with a clicking sound.
Turn the switch to AUTO position and the air conditioner will
run in AUTO mode.
Close the panel firmly to its original position.
Note:
The "COOL" mode on the control board is only provided for testing
purposes.
AUTO/COOL º
Toggle Switch
Temporary switch
AUTO/COOL º
(42HQE009 / 012 / 022)
Button switch
(42HQE018)
Manual operation