GB - 9
42HQE009 / 012 / 018 / 022
E N G L I S H
Use of the remote control
Lock and reset button function
A When you push the LOCK button, all current settings are
locked in and the remote controller does not accept any
operation except that of the LOCK button.
Use the lock mode when you want to prevent settings from
being changed accidentally or playfully.
Push the LOCK button again when you want to cancel the LOCK
mode.
B When you push the RESET button, all current settings are
cancelled and get into the condition of beginning.
In the clock, the colon in "0:00" will flash, the mode displays
"Auto", fan speed displays "Auto", the temperature displays "24".
Automatic operation
When you set the air conditioner
in AUTO mode, it will automatically
select cooling, heating (cooling
only type without), or fan only
operation depending on the room
temperature.
Once you select the operating
mode, the operating conditions
are saved in the unit's
microcomputer memory.
Thereafter, the air conditioner will
start operating under the same
conditions when you simply push
the ON/OFF button of the remote
controller.
Start
The OPERATION lamp on the
display panel of the indoor unit
starts flashing.
Mode select button (MODE)
Select AUTO.
Temperature button (TEMP.)
Set the desired temperature.
Normally, set it between 21 ºC
to 28 ºC.
ON/OFF button
Push this button to start the air
conditioner.
The OPERATION lamp on the
display panel of the indoor unit
lights.
The operating mode is selected in accordance with the room
temperature and operation starts after approximately 3 minutes.
Stop
ON/OFF button Push this button again to stop the air conditioner.
If the AUTO mode is uncomfortable, you can select the desired
conditions manually.
When you select the AUTO mode, you do not have to set the fan
speed. The FAN speed display will show AUTO and the fan speed
will be automatically controlled.
AIR
DIRECTION
SWING
OK
CLOCK
TIME ADJUST
CANCEL
ECONOMIC
RUNNING
TIMER ON
TIMER OFF
AUTO COOL DRY HEAT FAN
TEMP
CLOCK
TIMER ON
TIMER OFF
SPEED AUTO LOW MED HIGH
MODE
ON
OFF
TEMP.
FAN
SPEED
AIR
DIRECTION
SWING
CLOCK
ECONOMIC
RUNNING
TIMER ON
TIMER OFF
TIME ADJUST
OK
CANCEL
Cooling/fan only operation
Start
Connect the unit with the power.
The OPERATION lamp on the
display panel of the indoor unit
starts flashing.
Mode select button (MODE)
Select COOL, HEAT (cooling
only type without), or FAN
ONLY.
Temperature button (TEMP.)
Set the desired temperature.
Cooling 21 ºC or higher
Heating 28 ºC or lower
Fan speed button (FAN
SPEED)
Select any of the "AUTO"
"LOW", "MED" and "HIGH".
ON/OFF button
Push this button to start the air
conditioner.
The OPERATION lamp on the
display panel of the indoor unit
lights.
The operating mode is selected in accordance with the room
temperature and operation starts after approximately 3 minutes
(If you select FAN ONLY mode, the unit will start immediately.)
Stop
ON/OFF button
Push this button again to stop the air conditioner.
The FAN ONLY mode does not control temperature.
• Therefore, perform only steps
,
, and
to select this mode.
Drying operation
Start
Connect the unit with the power.
The OPERATION lamp on the
display panel of the indoor unit
starts flashing.
1. Mode select button (MODE)
Select DRY.
2. Temperature button (TEMP.)
Push the "TEMP." Button.
The fan speed indicator
displays AUTO.
The Indoor fan speed will be
automatically selected LOW.
3. ON/OFF button
Push this button to start the air
conditioner.
The OPERATION lamp on the
display panel of the indoor unit
lights, and operation starts
after approximately 3 minutes.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
AUTO COOL DRY HEAT FAN
TEMP
CLOCK
TIMER ON
TIMER OFF
SPEED AUTO LOW MED HIGH
MODE
ON
OFF
TEMP
FAN
SPEED
AIR
DIRECTION
SWING
CLOCK
ECONOMIC
RUNNING
TIMER ON
TIMER OFF
TIME ADJUST
OK
CANCEL
A
B
AUTO COOL DRY HEAT FAN
TEMP
CLOCK
TIMER ON
TIMER OFF
SPEED
AUTO LOW MED HIGH
MODE
ON
OFF
TEMP
FAN
SPEED
AIR
DIRECTION
SWING
CLOCK
ECONOMIC
RUNNING
TIMER ON
TIMER OFF
TIME ADJUST
OK
CANCEL
