![background image](http://html.mh-extra.com/html/carrier/39hxc/39hxc_manual_2561930026.webp)
Current unit status
Symbols
Description
Active fault present (maintenance)
Fire fault active
Symbol flashing: ventilation starting
Symbol off when the ventilation is in a steady state
Setpoint monitored
Symbols
Description
Setpoint 1 in progress
Setpoint 2 in progress
Temperature, setpoint, time (central part of screen)
Symbols
Description
Indicates the ambient temperature if the unit is running, otherwise OFF indicated if the unit is shut down or with a
danger fault.
If the knob is used, indicates the value of the setpoint or parameter being set.
By default indicates current time
If the knob is used, name of setpoint being set:
Mode = selecting setpoint 1 or 2 (this choice is visible only if the setpoint 1 / 2 selection is controlled by time slot or
CMS (P160=1)
CsgC: heating temperature setpoint 1 value
CsgF: cooling temperature setpoint 1 value
Cali: room temperature sensor calibration (limited to +/-3°C)
149
Th Tune
3.15 - Temperature setpoint compensation
The temperature setpoint compensation function is used to adjust the temperature setpoint according to the outdoor temperature.
If the temperature setpoint compensation function is selected (P270), a compensation is calculated according to the fresh air temperature,
in accordance with the curves below.
P270.3
P270.2
P270.1
Fresh air temperature
Heating setpoint compensation (in °C)
0 °C
Fresh air temperature
P270.7
P270.5
P270.6
Cooling setpoint compensation (in °C)
0 °C
3 - FEATURES
26
Summary of Contents for 39HXC
Page 1: ...C O N T R O L S M A N U A L Translation of the original document 39HXC 39HXE 39HXV ...
Page 2: ...2 ...
Page 62: ...62 ...
Page 63: ...63 ...