![background image](http://html.mh-extra.com/html/carrier/38qus018ds2-series/38qus018ds2-series_service-manual_2560810038.webp)
38
/
78
10.7 Re-installation while the outdoor unit needs to be repaired
1. Evacuation for
the whole system
Procedure:
1). Confirm that both the 2-way and 3-way valves are set to the opened position.
2). Connect the vacuum pump to 3-
way valve’s service port.
3). Evacuation for approximately one hour. Confirm that the compound meter indicates -0.1Mpa.
4). Close the valve (Low side) on the charge set, turn off the vacuum pump, and confirm that the gauge
needle does not move (approximately 5 minutes after turning off the vacuum pump).
5). Disconnect the charge hose from the vacuum pump.
Summary of Contents for 38QUS018DS2 Series
