1
st
Steps for DLS Troubleshooting
(end)
Tools/Material required for DLS Troubleshooting & Servicing.
All the same tools required for properly installing Ductless
equipment. See CE’s Ductless Install Training for more details.
In addition to the above, the following are a must have.
•
A Megger
–
This is crucial for checking out a
compressor. An Ohm meter is useful, but a Megger
is essential.
•
Conductive Grease
–
This is needed when replacing
some of the PCB’s in the outdoor units. This can be
purchased through CE or online.
•
A spare wireless remote control, part numbers:
RG57
–
17317000A34063
RG10
–
17317000A59628
RG66
–
17317000A45681
•
Support material from CE or Carrier. Service
Manuals, Product Data. Download to your
electronic device before going to the site.
