Carrier 30RBV, Installation Instructions Manual

Page: 1 / 24

1
00DCG000169400A
E
n
g
lis
h
WALL-MOUNTED USER INTERFACE
WUI
Installation instructions
Installation precautions
Introduction
Read the instructions carefully before placing this
device. The manufacturer declines all responsibility for
any inconveniences or damages caused by not
complying with instructions given in this manual. All
warranty claims are void if instructions provided in this
manual are not observed.

Only qualified installers should be allowed to install
and service the equipment.

All instructions provided in this manual should be
read and followed.

Incoming equipment should be carefully checked for
possible damage caused during transport or by
incorrect handling. In case of damage, file a claim
with the transport company.
General installation requirements

After the installation, carry out a complete system
check and explain all system functions to the user
(see WUI end-user manual document) .

Dispose of all packaging materials in accordance
with all applicable local regulations.

Take precautions to prevent electrostatic discharge
to the device when installing, servicing or operating
the equipment.
Environmental
Storage temperature: -20 to 48°C
Relative humidity: 0 to 95% non-condensing
Operating temperature: -20 to 46°C
Package contents

WUI – user interface

Two screws

Installation manual