background image

NOTES TO USERS

 

Thank you for purchasing Carrier Absorption Chiller. 
Before operating the Chiller, please read this manual thoroughly. 

 

Please  utilize  the  Chiller  to  its  optimum  performance  by  following  recommended  daily  maintenance  and  handling,  and 
periodic service. 

 

If you need any information about maintenance contract or any other inquiries, please contact Carrier service agent. 

 
 

DECLARATION OF CONFORMITY < for CE marking model >

 

This product is marked " CE " as it satisfied EEC Directive No. 2006/42/EC, 2014/30/EU, 97/23/EC, 2009/142/EC and 
conforms with following standards.   

 

This declaration will become void in case of misusage and/or from non observance though partial of Manufacturer's 
installation and/or operating instructions. 

 

Class and group description (EN 55011, clause 5.1) 
This  is  group  1,  class  A  product  according  to  EN  55011.  This  means  that  this  product  does  not  generate  and/or  use 
intentionally  radio-frequency  energy,  in  the  form  of  electromagnetic  radiation,  inductive  and/or  capacitive  coupling,  for  the 
treatment of material or inspection / analysis purpose and that it is suitable for use in all establishments other than domestic 
and those directly connected to a low voltage power supply network which supplies buildings used for domestic purposes.   

 

Statement for Class A Equipment (EN 55011, clause 5.3) 
This is a class A product. There may be potential difficulties in ensuring electromagnetic compatibility in environments other 
than industrial, due to conducted as well as radiated disturbances. 

 

Cable Specification and Equipment Orientation (EN 55011, clause 7.5.2 and EN 61000-6-2) 
Refer to the "Field wiring" section of the Installation manual. 

 

CE Marking and Apparatus Identification (2006/42/EC, clause 16.2 and 2004/108/EC, clause 8.1) 
There are printed on the nameplate of the chiller control panel. 

 

Name and Address of Manufacture 
Refer to the document of Declaration of conformity. 

 

Statement for Equipment for witch Compliance with the Protection Requirements is not ensured in Residential Areas 
(EMC Directive 2014/30/EU, clause 9.4) 
  - This product must not be used in residential areas. 
  - This product may cause interference if used in residential areas. Such use must be avoided unless the user takes 

special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television 
broadcasts. 

 

UL CERTIFICATION < for UL marking model > 

This  product  has  met  the  necessary  design  and  construction  qualifications  for  certification  per  Underwriters’ 
Laboratories. Each machine carries a UL listing and is labeled accordingly. 

 

PRODUCT PROFILE 

(1) Excellent for peak shaving during high electrical demand periods. 
(2) 

Designed to provide chilled water from waste heat sources, generated from industrial processes and 
cogeneration systems. 

(3) 

Allows diversification of critical cooling requirements. Critical cooling loads are met with minimal electrical power 
input with a hot water-fired chiller. 

(4) 

Allows for smaller generator set installation be utilized since the electrical load associated with an absorption 
chiller is minimal when compared to an electric chiller. 

(5) 

Ozone safe, CFC free. Cooling requirements are met without chlorine based refrigerants. 

(6) 

Reduces effectors to global warming. Minimizes global impact by greatly reducing electricity consumption and 
eliminating the use of greenhouse gases. 

(7) 

Environment: Molybdate solution inhibitor is used with no impact on environment. 

(8) 

Low noise and vibration. The absorption chiller dose not utilize a large motor-compressor, and this leads to quiet, 
trouble-free operation. 

(9) 

Small footprint saves facility space. 

 

USE OF PRODUCT

 

Absorption Chiller is air conditioning equipment achieving comfortable space, energy saving, and economic efficiency. 
It  has  been  used  in  office  buildings,  hotels,  department  stores,  hospitals,  schools,  convention  centers,  government 
building, etc. 

 
 

Note:    The contents of this manual are subject to change without notice.

 

 

Summary of Contents for 16LJ-F Series












Reviews: