![background image](http://html.mh-extra.com/html/carrier/0131cp/0131cp_installation-manual_2560392021.webp)
EN
EN
ID
– 20 –
39-EN
40-EN
Auto restart (signal receiving unit)
1. Setting
Press and hold down the TEMPORARY button for
3 to 10 seconds, and the unit will “Pi-pi”, while the
operation light (green) blinks for 5 seconds.
Then, auto restart is set to on. At this time, the unit
will enter temporary operation mode. Then, you can
start the unit with a remote controller to standard
operation mode.
2. Cancel
To set it back to off, repeat the same procedure.
The unit will “Pi-pi” and auto restart is set to off.
When the TEMPORARY button is pressed and held
down for more than 10 seconds, the unit will “Pi”
while the light (green), the light (green) and
the light (orange) blink quickly.
Then, the unit will start a forced test run. Press the
TEMPORARY button again to stop the unit.
To change the setting, follow the procedure again.
TEMPORARY button
11
<Daily maintenance>
Cleaning of air filter
If
is displayed on the remote controller, maintain
the air filter.
1
Push the
button to stop the
operation, then turn off the circuit breaker.
2
Open the air intake grille.
Remove the screws of air intake grille fixing
knob on a side of each filter.
Slide the air intake grille fixing knobs (two
positions) toward the arrow direction (OPEN),
and then open the air intake grille.
3
Take out air filter.
Push the handle of the air filter, and remove the
hook of the air intake grille. Pull out the air filter
toward you.
4
Cleaning with water or vacuum cleaner.
If dust is heavy, wash it with tepid water
including neutral detergent or water.
After cleaning with water, dry it completely in the
shade.
5
Mount the air filter.
6
Close the air intake grille.
Close the air intake grille, and then fix it securely
while sliding knob closed side (CLOSE).
Fix the screws of air intake grille fixing knob on
a side of each filter.
7
Turn on the circuit breaker, then push the
button on the remote controller to
start the operation.
8
After cleaning, push
.
display disappears.
CAUTION
Do not start the air conditioner while leaving air filter
removed.
Push the filter reset button.
(
indication will be turn off.)
8
1,7
Air intake grille fixing knob
Air intake grille
Air filter
S
lid
e
Air intake grille hook
Air filter handle
Air filter handle
Air filter
Air intake grille fixing hook
Air filter
Air intake grille
Air intake grille fixing knob
Maintenance
1115652934_EN_TH.indd 20
1115652934_EN_TH.indd 20
5/12/20 3:02 PM
5/12/20 3:02 PM