NOTE
Anti-fretting dielectric grease (P/N 02-00311-02) must be applied to each electrical connection.
1. Connect the eSolutions module harness (
22-03130-00
) to the mating unit engine harness
connectors and all applicable options (fuel sensor, door switch, power control switch, etc.). See
Figure 1.15.
For 960 Units after Serial Number TFP91605321
For Supra 960 after serial number TFP91605321 only, connect the eSolutions module harness to
the mating unit engine harness connectors and all applicable options (fuel sensor, door switch,
power control switch, etc.)
Figure 1.15 - Power and Communication for 960 Units after S/N TFP91605321
Supra 960
Unit Harness
2. Check all harness securing locations to make sure that harness is neatly secured with no loose
sections or potential chafing points.
3. Reinstall unit doors.
4. Reconnect unit negative battery cable.
5. Commission the eSolutions system and verify proper operation. Refer to
Section 2.
11
62-12110
Summary of Contents for eSolutions Supra 550
