manualshive.com logo in svg

Carrier Access AB II, User Manual

The Carrier Access AB II User Manual is a comprehensive guide that provides detailed instructions and information about operating our product. It is available for free download on manualshive.com, ensuring quick and easy access for all users seeking to understand and utilize the full potential of their Carrier Access AB II.

Share
Download
background image

Setting Up Remote Monitor

1-9

A dialog box appears, asking if you want to save this configuration.

3. Select the Yes button to save your configuration.

1.7.1 Setting Up Remote Management

The next thing you must do is set up remote management for your Access Bank II on the Remote 
Management screen. You cannot connect the remote management PC to the Access Bank II until this 
is done. The Remote Management screen should still be displayed.

You can set up for either direct connection or modem connection on the Local Comm Settings 
window of this screen. The following procedure is for direct connection only. 

1. Select Direct Connection from the Connect Via ... section of the Remote Management screen.

2. Select the comm port and baud rate in the Local Comm Settings section of the Remote Man-

agement screen.

Summary of Contents for AB II



































































Reviews:

No comments

Related manuals for AB II

Radio Shack 15-2130 Owner'S Manual preview
15-2130
Brand: Radio Shack Pages: 49

Brands by name

Popular brands

Load more brands