47
4. use the flat-headed screwdriver to push the parts of the
housing apart in the area around the connector
➋
.
5. use the flat-headed screwdriver to lift the plastic housing
out of the other half of the housing
➌
.
6. slide the flat-headed screwdriver in between the plastic
housing parts, release the locking latches on both sides
and remove the bottom half
➍
.
7. lever the plate out of the inner housing and bend up-
wards along with the batteries
➎
.
8. separate the batteries from the board with the wire cutters
➏
. dispose of the batteries separately! (
→
11. disposal).
➊
➍
➋
➎
➌
➏
the nickel-metal hydride batteries used for this de-
vice may not be treated as household waste. the bat-
teries must be disposed of properly. contact battery
distributors or local waste disposal points for this.
nimH
