carrello Milano CRL-0001, Instruction Manual

Page: 9 / 40

8
ASSEMBLY AND OPERATING INSTRUCTIONS
ATTACHING AND REMOVING THE BUMPER
WARNING: WHEN A CHILD IS IN THE STROLLER KEEP THE BUMPER ATTACHED TO
THE ADAPTORS AT ALL TIMES.
A Stand beside the stroller and pull the fabric back from the sides of the stroller
to expose the stroller hinge. Slide the bumper mouldings onto the stroller hinge
(as shown by the arrow) until you hear a ‘click’ which indicates the arm bar has
locked in. Pull up on the arm bar to ensure it hasfully locked in.
B To remove the bumper, push the red quick release tabs in on the inside of each
stroller hinge and slide the arm bar out of the stroller.
ADJUSTING THE BACKREST
WARNING:
• THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR USE WITH CHILDREN LESS THAN 6
MONTHS OLD.
• THE LOWEST RECLINE POSITION SHOULD BE USED TO TRANSPORT BABIES. THE
BACKREST CAN BE ADJUSTED TO A MORE UPRIGHT POSITION AS THE CHILD GROWS
OLDER AND IS ABLE TO SUPPORT ITS HEAD WITHOUT ASSISTANCE.
PLEASE NOTE : If the child is sitting in the seat, support the backrest as it reclines. If you
have difficulty adjusting the backrest you may need to remove the child from the seat
to allow you to raise or lower the backrest with ease.
Click
A
1
2
B
Main
adjuster
moulding
Backrest
adjuster
bu�on
1
2