carrello Milano CRL-0001, Instruction Manual

Page: 12 / 40

11
ASSEMBLY AND OPERATING INSTRUCTIONS
B Using the stroller
The stroller sear has 3 harness slots at different heights to accommodate the
child. The shoulder straps must be positioned near the child´s shoulders. To
change the shoulder harness height, unclip the shoulder harness straps from the
waist harness straps and push the shoulder harness tongue out of the current
harness slot and thought the back of the seat pad and then pull the shoulder
harness buckle tongue through the desired slot. Clip the shoulder harness straps
and waist straps back together.
USING THE STROLLER
• Always ensure you bend your knees where appropriate and take due care when
lifting the frame.
• With your hand through the wrist tether strap loop, push the stroller holding
the handle.
• The stroller can be steered in the desired direction - allowing the front wheels
to swivel will make this easier.
• The front wheels may wobble or oscillate when walking fast. Locking the front
swivel wheels will stop this.
• The stroller can be taken up kerbs by either pressing down on the handles and
raising the front wheels or turning the stroller around and pulling the stroller up
the kerb.
• Caution is required when pushing the stroller on a steep slope as the stroller
may become unstable. Always hold the handles firmly.
• Do not run with the stroller.
• Whenever you stop, always apply the brakes before you leave the stroller.
• Do not hang bags or goods from the handle. Use the storage basket.
молния