TROUBLE SHOOTING
Precautions
Repairs may be carried out by customer service of authorized
technicians only!
Before you call customer service, please check whether you can correct the
fault yourself.
A technician will charge you for advice, even during the warranty period.
Problem
Solution
The mains plug is inserted.
Display does not
come on
“
”Is flashing
“
”Is flashing
Dryer does not start
Check the programme selected.
Check fuse in the house.
Empty condensation container.
If failure, check hose for condensation outlet.
Clean air cooler.
Clear lint filter.
Check the start button has selected .
Check the the door has
closed. Check the programme
Water is running out
Align dryer horizontally.
Clear air condenser and door seals.
Press door until it “clicks”into position.
Door is open by itself
Humidity in the room is
increase significantly
Degree of dryness was
not reached or drying
time too long
Check the
clothes is over load .
Ventilate room adequately.
Clean the cool grille.
Ensure that the air condenser has been inserted.
Clean lint filter and wash condenser.
Empty container.
Check water outlet.
Dryer installation too restricted.
Clean the moisture sensors.
Use next higher drying programme or using
Timer programme.
If you cannot correct a fault yourself or if a repair is required
:
1.Set programme knob to OFF
.
2.Pull out the mains plug and call the service
.
17
