INSTALLATION AND MAINTENANCE
Cleaning and routine maintenance
Clean the lint filter
Leave the dryer to cool down.
1.Open the machine door.
2.Take out the lint filter, pull upward to take it out.
3.Clean the lint filter; wipe off the scrap threads
accumulated on the lint filter.
4.Reinstall the lint filter.
NOTE!
1.The lint filter accumulated on the filter will block the air circulation, which
will cause the extension of drying time and energy use; therefore, the scrap
thread filter shall be cleaned after each use.
2.Do disconnect the power cord before cleaning!
3.Do not operate the dryer without the lint filter !
4.Clean the lint filter after each use to prevent lint accumulation inside the dryer.
Wash air condenser
-Leave the dryer to cool down.
-Residual water may escape,place an absorbent
cloth under the maintenance flap.
1.Unlock the maintenance flap.
2.Completely open maintenance flap.
3.Screw both locking levers towardas each other.
4.Pool out the air condenser.
5.Clean the air condenser completely,drain thoroughly.
6.Clean the seals.
7.Re-insert the air condenser,handle at the button!
8.Unscrew both locking levers.
9.Cloth the maintenance flap until it locks into position.
Please clean the air condenser if frequently used
.
Do not damage the air condenser!
1.Clean with warm water only;do not use
hard/sharp-edged objects! Do not operate
the dryer without the the air
condenser
!
2.During drying, water may collect between the window
and the seal but this does not affect the function of your dryer!
15
