15
13
Y
back sideφ5
4.4
5
6
Y
Y
Y
5
Y
30.5
4.4
Cutting procedures of length direction
The panel span is 718mm. In case of cutting length direction, cutting length of the roof(Y) in multiples
of 718mm is recommended.
Cut the materials from opposite side of the round gutter installation.
Move the post as the same length as the cutting
length of the roof（Y）.
Move the center post in case of 3-post type.
Cutting of the front frames
Cutting of the gutter
Cutting of the main frames
Cutting of the panels
1.Front frame processing
Cut the materials as the same length as the cutting length of the roof（Y）.
Cut the materials as the same length as the cutting length of the roof（Y）.
φ3（U-shaped gutter）
φ3(U-shaped gutter)
40(cutting on site)
Y/2
3-post
type
2.Gutter processing
Length dimension（W）
Cut range
In case of n ＝ 0
B ≦ 650
It can't be cut from 465mm to
535mm for installing gasket.
Y＝718 x n＋B
（n=number of panel pitch）
※
●
In case of n ≧ 1
16 ≦ B ≦ 650
●
