CARPENTER MODEL 74E 3-IN-1 COAXIAL WIRE STRIPPER
Phone: 315-682-9176 Fax: 315-682-9160
Page
1
Revised 2/17/10
Website: www.carpentermfg.com E-mail: [email protected]
CARPENTER MODEL 74E 3-IN-1 COAXIAL WIRE STRIPPER
INTRODUCTION
Thank you for choosing Carpenter Mfg. Co. Inc. Wire Processing Equipment.
For over 55 years Carpenter has been a leader in Wire Processing Technology
and Service. Our desire has always been to bring you reliable products.
We look forward to a long healthy relationship with you and our company.
The Model 74E can process a wide range of wires as referenced on the following page.
These processing specifications are based upon the most commonly
manufactured wires. Special applications may arise with wires that are within the
specification limits of the machine but are very difficult or unsuccessful to process.
Likewise, wires that exceed the specified limits of the machine can sometimes be
processed. Because there are many variables involved in Wire Processing
we strongly recommend a FREE Wire Evaluation at our factory
followed by a demonstration from a Carpenter representative
to insure the ultimate success of your Wire Processing Application.
This operating manual explains how to operate the Model 74E.
To ensure the best performance of your machine, read this manual carefully until you
familiarize yourself thoroughly with its operation and features.
After you have read through the manual, keep it available for reference.
Use this manual as a quick and handy reference tool for clarifying any questions that
may arise. If you have any questions about this machine or service please let us know.
Our phone number is 315.682.9176, fax number 315.682.9160
Website: www.carpentermfg.com, E-mail: [email protected]
Carefully unpack the Carpenter Model 74E.
We recommend that you keep the original box and packaging
as it will protect the machine for future transportation if necessary.