ROC
XRS ACC Bite alarm:
Changing the battery:
Open your bite alarm by loosening the four screws in
the corners of the case. Replace the battery inside with a
new one and close the housing again. Required batteries:
1 x 9 V block - 6LR61
Caution: When closing the housing, make sure that the
seal is seated correctly and that no cable is trapped
between the housing halves. The watertightness is then
no longer given.
Troubleshooting:
No function: batteries empty, defective or inserted
incorrectly
No radio transmission: The coding does not match.
Radio interference: Due to the large number of radio
signals, preferably in the vicinity of residential areas,
extraneous signals can become annoying. A change of
coding can remedy this situation.
