INST-PM-CRSY102
Rev B 04/11/2018
6.
Reinstall left and right side access panels by placing each panel bottom into
groove and rotating panel upward until latches catch.
7.
If necessary, roll recirculator back into desired location and reconnect chamber
drain(s) to recirculator inlet.
8.
Plug in power cord and turn on recirculator.
Chamber drain/recirculator inlet is gravity fed. Any vertical rise or
kink in drain line that is higher than chamber drain will result in a
trap and not allow chamber to drain to recirculator.
Summary of Contents for CRSY102
Page 1: ...CRSY102 INST PM CRSY102 ...
