5
|
CarnivalKingSupplies.com
Funnel Cake Fryer
User Manual
5.
With the oil in the pot, turn the fryer ON using the switch and turn temperature knob to desired
temperature. When the desired temperature has been reached, the orange “Hot Light” will turn off and
cycle, and the temperature controller will maintain the temperature automatically.
6.
Allow the Fryer 30-45 min to reach desired temp.
7.
Do not overload the pot with product.
8.
Using the ring mold and funnel, pour your desired amount of funnel cake batter slowly into the pot and fry
for desired time.
9.
If using tongs to separate product, you must also wear high heat gloves to prevent burns.
10.
Once product is done, safely remove the product with tongs and place onto a grease tray to drain the
additional grease of the product.
Note: To help maintain oil quality, periodically skim off excess batter (food) particles.
Important Operating Information and Quality Control Tips:
•
The unit is fitted with a preset manual reset safety thermostat. This will disengage the heating element
should the oil reach a temperature over 430°F.
•
Don’t overheat. Don’t fry if the oil temperature exceeds 400°F.
•
Don’t waste money. Use only high quality heavy duty frying shortening.
•
Don’t fry food in broken-down frying shortening. Broken down oil is thinned, darkened.
•
Don’t overload the frying pot.
•
Don’t shake breaded items over fryer.
•
Don’t salt items over fryer.
Cleaning
1.
Always turn unit OFF and allow it to cool completely before cleaning.
2.
Never clean unit by immersing it in water.
3.
Drain all the oil, after cooled, using the front drain into a pan large enough to hold 5 gallons of oil. Oil should
be drained nightly at a minimum and more depending on frequency of use.
4.
Remove the protective bottom grate with tongs. Do not touch oil with your hands.
5.
Gently lift up electrical box unit from back of machine. This will remove the element from the frying oil. The
microswitch on the bottom of the electrical box unit will automatically cut off power in case electric plug is
not removed from power supply. Place this in a clean dry place.
6.
Gently wash the element with soap and warm water. Use a soft sponge. Never use harsh chemicals or metal
scrubbers to clean the element.
7.
Gently wash oil tank with soap and water, dry it thoroughly.
8.
Replace the Electrical box and element lining it up and ensure that everything has been wiped dry.
9.
For a deep clean, we recommend using Noble Chemical Fryclone Fryer Boil-Out (see product instructions).
10.
Turn the unit off.
11.
Rinse with clean water to remove all cleaning mixture.
12.
Rinse the inside of the tank with 2 cups of vinegar.
13.
Rinse with clean water until the vinegar odor is gone. The fry tank must be thoroughly rinsed since even a
trace of cleaner left inside the tank will contaminate the fry compound.
14.
Dry thoroughly.
15.
Cover the fryer tank with the night cover when the unit is not in use.
16.
Clean all exterior surfaces of unit on a regular basis with a damp cloth.
17.
To remove discolorations or oil film, a non-abrasive cleaner may be used such as Noble’s 147QUIKSAN.
