![background image](http://html1.mh-extra.com/html/carnes/hxhas/hxhas_owners-manual_2559426010.webp)
installation
|
CommerCial humidiStat
10
Form 16767
Figure 4: Outdoor Temperature Sensor in Furnace Intake Pipe
Connect to
Humidistat
(ODT)
Drill Hole in
Pipe & Seal
OAT (Outdoor
Air Temperature)
Sensor
2” min.
INSIDE
OUTSIDE
Furnace
Fresh Air
Intake
outdoor air intake duct installation
Mount the sensor in an outdoor air intake by drilling a ¼ inch hole within 8
inches of outside. Angle the hole towards the outside. Insert the temperature
sensor into the intake pipe until the sensor is at least 2 inches outside the
structure in the intake pipe. Seal the hole and secure the wire so it cannot
be accidentally pulled out.