7
USING YOUR APPLIANCE (HAIR DRYER)
Start With Good Hair Maintenance.
• Always keep your hair clean and properly conditioned. Hair is only as
healthy looking as the care it gets. The cut is important, but proper
care is crucial.
For a Quick Drying Job
• Set the speed switch to high setting. Always direct the airflow at
your hair and away from scalp, face, and other heat sensitive areas
keeping the dryer in constant motion.
Shaping and Smoothing
• Set the switch to low or high settings as needed. Using a thermal
round styling brush, roll a section of hair in the direction you desire,
then hold the heated airflow directly on the hair (but away from scalp)
for 2 to 5 seconds depending on the texture and condition of your
hair. You may wish to use the nozzle attachment to zero-in on difficult
areas.
Relaxing A Natural Curl
• To straighten stubborn hair, slowly brush a section down, preferably
with a thermal brush, or the nozzle attachment, while holding the
heat on the taut hair. If your hair dries before completion, apply
small amounts of water from a spray bottle or wet fingertips, until it
becomes more manageable. Go on to the next section and so on.
Add Body And Bounce To Lifeless Hair
• Brush a section of hair against its natural growing pattern while
applying heat from your dryer. Allow hair to cool before brushing into
final style. For long hair use the same technique, only direct the hot
air underneath the strands of hair.
To Turn The Dryer Off
• Set the switch to the “O”setting
IMPORTANT:
• Do not aim the flow of hot air directly at one spot for any length of
time as possible injury or damage may occur. Use a brush or your
hand to briskly shake out excess moisture while blowing hot air
though your hair. Lean over so that hair hangs freely away from your
head or face. For favourable styling conditions, leave just enough
moisture in the hair to make it manageable.
