8
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6060
USING YOUR APPLIANCE
Changing the Accessories
• All accessories have two arrow marks
and located at their base.
• The Hot Air Styler has an arrow mark
located above the Accessory Release
Button.
1. To attach an accessory, grip the handle
and position the accessory’s over the
above the Accessory Release Button.
2. Press the Accessory Release Button and
gently push downward toward the main
body at the same time.
3. Turn the accessory left, until they click and
both arrows and are aligned. This will
lock the accessory into place.
4. To remove an accessory: grip the handle,
push the Accessory Release Button and
twist the accessory until it aligns the on
the accessory with the on the handle.
Lift the accessory upwards to remove it
completely from the Hot Air Styler.
WARNING!
Always allow the appliance and
accessories to cool before removing or changing
them.
Heat Settings:
• The Hot Air Styler has two heat settings.
1 is Low and 2 is High. To switch the Hot
Air Styler off, slide the switch into the 0
position, and unplug the appliance from the
mains outlet.
• The Low setting produces reduced
airflow and a lower temperature. It is
recommended to begin styling your hair on
Low and move up to High only if required.
The High setting produces maximum
airflow and a higher temperature.
Styling with the Brushes:
Note:
Do not use the appliance on completely
wet hair. Make sure that your hair is partially dry.
1. Select your choice of brush attachment
and assemble.
2. Plug the Hot Air Styler into the mains outlet
and switch it on.
3. Choose 1 for Low or 2 for High from the
heat settings, depending on your hair type.
4. Wait for 3 -5 minutes for the Hot Air Styler
to reach the desired temperature.
5. Ensure hair is clean and combed through.
6. Begin by sectioning your hair.
7. Take a small section of hair and hold it taut,
down and away from the scalp.
8. Starting at the roots, run the Hot Air Styler
down the section of hair.
9. Brush through each section hair twice with
the Hot Air Styler to smooth out any frizz.
10. Style your hair as desired using the Hot Air
Styler.
Styling with the Curling Iron:
1. Attach the Curling Iron attachment to the
Hot Air Styler.
2. Plug the Hot Air Styler in and switch it on.
3. Choose 1 for Low or 2 for High from the
heat settings, depending on your hair type.
Note:
Choosing a lower speed allows more
control over styling your hair, whereas a higher
setting can speed up the drying process.
4. Wait for 3-5 minutes for the Hot Air Styler
to reach your desired temperature.
5. Ensure hair is clean and combed through.
6. Begin by sectioning your hair.
7. Take a section of hair and clamp the end
with the curling iron.
