6
For best results, wash, comb and dry hair until just damp to touch-although the appliance can be
used for touch ups at any time.
•
Plug in the appliance and place on a smooth, dry, flat surface.
•
Turn ON/OFF switch to ON, the red light will illuminate, indicating that appliance is heating up.
•
Starting at top of the head, next to the scalp, select a small section of hair and clamp between
the plates. Maintaining some tension, slowly slide the tongs down the section of hair from root
to tip. Be careful to avoid touching your hands or scalp with the hot plates.
•
Repeat process all over the head, allowing hair to cool before combing through.
•
After use, push ON/OFF switch to OFF, the red light goes off, indicating that the appliance
is cooling down.
1. Switch the hair straighteners off, unplug from the mains and allow to cool fully.
2. Wipe over the casing using a soft damp cloth (Do Not use chemical cleaners).
3. Do not immerse the unit in water or and other liquid.
4. Ensure all parts are dried thoroughly with a soft towel before reusing.
5. Do not use harsh abrasives or cleaners.
USING YOUR APPLIANCE
CLEANING YOUR APPLIANCE
