ASSEMBLY INSTRUCTIONS (CONT.)
4. Attach each LEG BRACE #5 to LEGS as shown with SMALL BOLT #8 and SMALL FLAT
WASHER #9. Feed wire leads through gasket, and carefully turn table over.
5. Attach ELECTRONIC SCORER #11 with SCREW #16.
6
* Before turning the
table over, carefully
feed two wire leads
through gasket hole
in center of side panel.
Carefully attach 2 wire leads to
ELECTRONIC SCORER #11.
Insert the lead “ A ”
into the “ A ” receptacle.
Insert the lead “ B ”
into the “ B ” receptacle.
A
B
A
B
8
#24
#24
#25
#24
Step 7: Attach the electronic dartboard #25, using the threaded holes on backboard, with bolts #24.
Optional (attach the cabinet to a wall):
If you plan to attach the cabinet to a wall, don't
attach the legs #11.
Use the 16" on center pre-drilled
holes in the backboard to attach the top and bottom
cabinet to the wall with screw #19 as shown.
Please make sure to screw into wall studs or use
the appropriate wall anchors (not included).
WALL
#19
#19
#19
16"
#24
#24
#25
