Carmelli NG1040 Assembly Instructions Manual Download Page 10

180-DAY LIMITED WARRANTY

This product is warranted to the original purchaser to be free from defects in material or workmanship 

for a period of  180 days from the date of the original retail purchase.

This warranty does not cover defects or damage due to improper installation, alteration, accident or

any other event beyond the control of the manufacturer. Defects or damage resulting from misuse, 

abuse or negligence will void this warranty. This warranty does not cover scratching or damage that

may result from normal usage.

This product is not intended for institutional or commercial use; the manufacturer does not assume 

any liability for such use. Institutional or commercial use will void this warranty.

This warranty is nontransferable and is expressly limited to the repair or replacement of the defective

product. During the warranty period, the manufacturer shall repair or replace defective parts at no 

cost to the purchaser. Shipping charges and insurance are not covered and are the responsibility of 

the purchaser. Labor charges and related expenses for removal, installation or replacement of the 

product or components are not covered under this warranty.

The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable 

or obsolete. 

The manufacturer shall not be liable for loss of use of the product or other consequential or incidental 

costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of 

injury resulting from the use of this product.

This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of

. Neither the manufac-

turer nor any of its representatives assumes any other liability in connection with this product.

All warranty claims must be made through the retailer where the product was originally

purchased. A purchase receipt or other proof of date of purchase will be required to process

all warranty claims. The model number and part numbers found within the assembly

instructions will be required when submitting any parts requests or warranty claims.

For further warranty information or inquiries, please call 800-759-0977

Summary of Contents for NG1040












Reviews: