Carman New Lite+, User Manual, Page: 65 / 81

New Lite+
65
How to register through website
1. Input http://www.carmanit.com into the address bar on browsers.
2. Refer to the JOIN page in our website.
Q&A
Q) Communication cannot be established.
A) 1. Check the connection of the diagnostic cable.
- Communication cannot be established if the diagnostic cable is not properly
connected. - Some old vehicles may have a problem on pin of DLC. 2. Check if power is
properly supplied to the main module. - Vehicle diagnosis can be affected by unstable
power source. - You need to check power from battery or from DLC connector.
- If the vehicle diagnostic cables cannot supply power from vehicle, connect the
cigarette lighter power cable for power.
- If there is electric potential difference between New Lite+ batteries and vehicle
batteries, communication is not available.
* If the problem is not solved, a hardware of scanner or a vehicle may be out of order.
* If so, the scanner requires to be repaired * Flooded cars may be not communicated
also it will cause damage to your scanner. So, check if there is any short circuit in
advance before scanning the flooded cars.
Q) I cannot turn on the module.
A) 1. Check if the battery in the module is charged. - The built-in battery may not be
charged. 2. The battery may not be able to function due to the ambient temperature.
- Avoid excessively hot or cold areas. 3. If battery life is over, booting by battery is not
available.