New Lite+
46
Chapter 5: Vehicle Diagnosis
If above picture is not shown, the communication error appears or
communication does not work, check again the status of vehicle and
connection of cables for diagnosis.
2. The screen as below appears.
-Actuator list-
3. Choose any actuator that you wan
t to diagnose and press “ENTER”.
4.Press
“F1” to start testing and “F2” to finish the test.
- Before starting actuation, make sure to check the operating condition to inspect the
system in the proper condition.
- The actuator time differs by the actuated items.
4. Press the (F2=Stop) button to stop the actuator function.
- Press this button to stop the actuator function during diagnosis.
Tip!
Summary of Contents for New Lite+
