Carlton Hurricane RS, Owner'S Manual, Page: 48 / 153

Hurricane Track MACHINE MAINTENANCE
28
•
Check hydraulic oil daily and replenish
as necessary. A site glass is provided for
easy viewing. If oil can be seen in glass,
there is enough oil in the tank. Do not
fill the tank more than 7/8 full; operating
at high temperature will cause oil to
expand and spill over if tank is full.
•
The machine is equipped with Citgo
AW32 hydraulic oil at time of
manufacture; use same or equivalent.
•
Inspect all guards, bolts, nuts and other
parts
daily for looseness and wear,
repair as necessary.
•
Inspect wiring harnesses for wear and
replace if necessary.
•
Check cutter wheel, pockets, and teeth
for wear
daily . If any repair is needed,
see Servicing Cutter Wheel section for
further instruction. DO NOT run
machine without a complete set of teeth
installed in cutter wheel.
•
Check and tighten setscrews in cutter
wheel bearing collars
weekly .
•
•
Check and tighten setscrews in jackshaft
and boom bearing collars
weekly .
CUTTER WHEEL
BEARING COLLAR
SETSCREW
BOOM BEARING
COLLAR
SETSCREW
JACKSHAFT
BEARING
COLLAR
SETSCREW