Cleaning, Specifications and Wiring Instructions
Do not use harsh cleaners or solvents as they may damage the
casing.
Remove the plug from the socket.
The body of the unit should be
cleaned using a cloth dampened
with warm water and detergent.
Make sure that water does not
go near the heating elements.
1
2
We continually strive to improve our products, specifications may change without notice.
No part of this publication may be produced, stored in a retrieval system or transmitted in any form or by any means, without the prior permission
in writing of Dixons Stores Group, nor be otherwise circulated in any form or binding or cover other than that in which is published and without a
similar condition including this condition being imposed on the subsequent purchaser.
The wires in your toaster mains lead are coloured in accordance with the
following:
You must use a 13 amp plug (BS1363), and fit a 10 amp fuse (BS1362).
If any other type of plug is used, a 10 amp fuse must be fitted, either in the
plug, adaptor or at the distribution board.
A mains plug with bared wires is hazardous if plugged into a mains output
socket.
Connect the blue wire to the neutral terminal of the plug which is marked
N
or
coloured black.
Connect the brown wire to the live terminal which is marked
L
or coloured red.
Connect the yellow and green wire to the earth terminal which is marked
E
.
If the power cable is damaged it must be repaired by a qualified repairer.
Specifications:
Power supply . . . . . .230-240V~50Hz
Power consumption . . . . .1200-1300W
Brown
(Live)
Blue
(Neutral)
10 amp fuse
Cord grip
N
L
E
Green &
Yellow
(Earth)
Carlton CT1400.qxd 18/01/01 10:39 Page 7
