background image

Safety Information

The blades and plates are very sharp, handle with care. 

• 

Always hold the knife blade 

by the finger grip at the top, away from the cutting edge, both when handling 

and cleaning.

Always remove the knife blade before pouring contents from the Bowl.

• 

Keep hands and utensils out of the Processor Bowl or Blender Jar whilst connected 

• 

to the mains socket. A scraper may be used but only when the Food Processor is 

not running .

In order to avoid a hazardous situation, this appliance must never be connected to 

• 

a timer switch. 
Excessive strain may cause the motor to overheat and stop. Please don’t operate 

• 

this appliance for longer than 3 minutes. Wait around 5-10 minutes for the motor to 

cool. A safety protector in the motor prevents overheating. If the motor stops, turn 

the appliance off. Do not operate this appliance in the presence of explosive and/

or flammable fumes.
Always switch off and unplug before fitting or removing parts, after use and before 

• 

cleaning.

For your protection, this appliance has an Interlock System so the food processor 

• 

won’t operate unless you remove the Blender Jar and close the fixing hole with the 

Safety Screw Cap. The Bowl needs to lock onto the Unit and the Cover must be cor-

rectly locked onto the Bowl. 
Always lock the Bowl or Blender Jar to the Motor Unit before attempting to fit the 

• 

Lid.
Always  unlock  the  Lid  before  attempting  to  remove  the  Bowl  from  the  

• 

Motor Unit.
This appliance will be damaged and may cause injury if the interlock mechanism is 

• 

subjected to excessive force.
Before removing the Lid from the Bowl, switch the appliance off and wait until the 

• 

attachment/ blades have completely stopped.

Place the Lid on the Bowl in the right position.  Both the Motor Unit and the Safety 

• 

Screw Cap, Bowl, Bowl Cover and Safety Screw Cap have been provided with marks. 

Make sure the mark on the Motor Unit is directly opposite the mark on the Safety 

Screw Cap, Bowl and Bowl Cover.
Thoroughly clean the parts that will come into contact with food before you use the 

• 

appliance for the first time. 
Do not exceed the quantities and preparation times indicated in the table.

• 

Do not exceed the maximum content indicated on the bowl, i.e. do not fill beyond 

• 

the maximum fill mark.
Never use your fingers to push food down the Feed Tube. Always use the Pusher 

• 

supplied.

Never use any accessories or parts other than those provided with this appliance.

• 

Summary of Contents for C22FPS09


















Reviews: