P a g e |
8
3 Hardware components
This section outlines the various hardware components that are included with the Void Scanner Wi-Fi box Mk4
system.
Details of the operation and care of the system are detailed in subsequent sections.
3.1 Void Scanner Wi-Fi box
The Void Scanner Wi-Fi box is housed in a ruggedised Peli case enclosure.
When the lid of the Peli case is closed, the Void Scanner Wi-Fi box is resistant to water and dust.
With the lid open, the internal panel is visible and the environmental protection IP rating is invalid.
The internal panel incorporates product markings, a 4-pin connector for the battery charger and two fuse holders.
Written information on the internal panel includes details of the internal battery and power requirements.
The serial number is also printed on the internal panel. Please refer to this serial number when contacting your local
Carlson service centre.
There are two fuse holders on the internal panel:
•
‘Fuse (Int)’ for the internal battery circuit, and
•
‘Fuse (Ext)’ for the external battery circuit.
Figure 2 Void Scanner Wi-Fi box internal panel
Connector for
battery charger
Power and
safety
information
Output power
light
Serial number
information
Fuse holders
for internal and
external power
sources
