P a g e |
34
EC declaration of conformity
Carlson declares that the Rodded Boretrak complies with the applicable standards and regulations.
Contact Carlson or visit
for the full EC declaration of conformity.
FCC (USA only)
Information to the user (47CFR section 15.19)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Information to the user (47CFR section 15.21)
The user is cautioned that any changes or modifications not expressly approved by Carlson or authorised
representative could void the user’s authority to operate the equipment.
Information to the user (47CFR section 15.105)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
WEEE directive
The use of this symbol on Carlson products and/or accompanying documentation indicates that the product should
not be mixed with general household waste upon disposal. It is the responsibility of the end user to dispose of this
product at a designated collection point for waste electrical and electronic equipment (WEEE) to enable reuse or
recycling. Correct disposal of this product will help to save valuable resources and prevent potential negative effects
on the environment. For more information, please contact your local waste disposal service or Carlson
representative.
Battery safety
An internal lithium-ion battery is supplied with the Void Scanner Wi-Fi box. The battery cannot be changed by the
user and must be replaced by a Carlson approved service engineer.
Additional Carlson external batteries can be purchased as optional accessories, to which these cautions apply:
•
Please dispose of waste batteries in accordance with your local environmental and safety laws.
